Ceiling T bar Roll Forming Machine
The T-bar is a technical profile used to support ceiling panels (unit cell ceiling), generally measuring 60x60cm and 60x120cm. This system consists of three different profiles in lengths of 600, 1200 called Cross Tees and 3600mm called Main Runner (main tee). Cross tee are mounted on both sides of the main tee by means of connecting pieces or hooks.
The profiles are generally available in base widths of 24 mm and 15 mm, while the height varies according to the load-bearing capacity and function that must be ensured. Many other sizes are available on the market. It is mainly a galvanized sheet metal base that gives the profile structure and strength, but once the ceiling has been assembled all we can see is a pre-painted sheet metal profile. The body and the ends of the profile also require special finishing and hooks or connectors to allow the profiles to be attached to each other and to the ceiling. There are two main types of connection profiles: integral hooks and alloys hooks.
We have different moulds on our punch machine to make both hooks.
The ceiling T bar roll forming machine has been designed for producing T Bars for ceiling panels connecting and roof constructions. The whole process is decoiler, roll former, punch, emboss,cut,out tables. Normally forming speed is around 40m/min.
Due to the light materials, a T bar roll forming machine usually wall panel and chain-brackets transmission. It’s another typical profile in light gauge steel system which is very essential in industry and building fields. There are punch version and not. Only need to add a punch machine. The holes are for connecting too.
We are experienced in producing other profiles in light gauge steel system, like omega, furring channel,angle, etc.
Linbay offers the T bar profile roll forming machine for ceiling, it is used to support ceiling panels which have a measurement of 60cm x 60cm and 60cm x 120 cm, which requires great resistance.
The profile has a width of 24mm and 15mm, with a variable height which will depend on the load capacity, galvanized steel is usually used to make this profile, pre-painted material can also be used, with a thickness from 0.3mm to 1.2mm. This machine can reach up to a speed of 40 m/min depending on the desired design, to achieve this speed the type of hydraulic cutting in motion has been chosen. It is necessary to have a punching station depending on the desired design, more stations may be needed.
If you are looking to create a design that is different from the current market, our team can help you make it possible by knowing your standards and requirements, thus offering you the different options that are most suitable for your company.
All our operating systems are translated into Spanish and English, as are the operating manuals, so that your work team can operate the machine efficiently and safely.
This production line working speed is around 0-40m/min according to cutting length, the forming speed is around 0-40m/min adjustable.
3 Ton Manual decoiler--Roll former-Emboss--(Punch)--Hydraulic cut--Out tables(Autostacker for optional speed reach to 40m/min)
|
T Bar Roll Forming Machine |
|||
|
NO. |
Item |
Specification |
Optional |
|
1 |
Suitable material |
Cold-rolled steel, Galvanized steel, PPGI, stainless steel |
|
|
Thickness(mm):0.3-1.2mm |
|||
|
Yield strength: 250 - 550MPa |
|||
|
Tensile stress( Mpa):G200Mpa-G350Mpa |
|||
|
2 |
Nominal forming speed(m/min) |
0-40m/min |
Or according to your requirement |
|
3 |
Forming station |
12 |
According to your profile |
|
4 |
Punch station |
1 |
Three or according to your profile |
|
5 |
Decoiler |
3Ton manual decoiler |
According to your profile |
|
6 |
Main machine motor |
7.5 kw Sino-German Brand |
Siemens |
|
7 |
PLC brand |
Delta |
Siemens/Panasonic |
|
8 |
Inverter brand |
Yaskawa brand |
Delta |
|
9 |
Driving system |
Chain drive |
Gear box drive |
|
10 |
Rollers’ materail |
#45 steel |
Cr12Mov/GCr15 |
|
11 |
Station structure |
Wall panel |
Iron cast structure |
|
12 |
Cutting system |
Post-cutting |
/ |
|
13 |
Power supply requirement |
380V 60Hz |
Or according to your requirement |
|
14 |
Machine color |
Industrial blue |
Or according to your requirement |
|
15 |
Contactor |
Schneider brand |
Or according to your requirement |
-
Decoiler
-
Roll former and flying cut
-
Formed products
-
Shearing part
1. Q: Why buy a Linbay machine?
A: At Linbay we seek to establish long-lasting relationships by offering the best quality and price, as well as unparalleled experience and attention in the market. We have customer service in Mexico and China to solve any questions or inconveniences, backed by our 12 years of experience in the market.
2. Q: What is the delivery time?
A: The lead time is 60 to 80 days, during which we produce, assemble and test to ensure that the machine meets your expectations and required safety standards.
3. Q: How do I get started with my machine?
A: Upon receipt of your machine, an assembly tutorial and operation manual will be provided. We recommend a visit from our technician if this is your first time using a forming machine or if you have doubts about its operation. The technician will explain every detail and train your work team.
4. Q: What process do I need to follow to buy a machine?
A: You can start by contacting our sales team via message or email. Afterwards, we will discuss which type of machine best fits your needs and standards. If you want to know more about our company, you can visit our office in Mexico or our factory in China for a tour and observe our manufacturing process. Once you decide to join the Linbay family, we will start manufacturing your machine after signing the contracts and making a 30% down payment.
