Corrugated/Sinusoidal Roof Panel Roll Forming Machine
RD-91.5 Sheet (B Deck) It serves as a substrate in composite decks or as a mezzanine with different types of surfaces, has good structural qualities, is symmetrical in its way of installation and has a respectable appearance. The dimensions for this profile are an effective width of 915.0mm and a cant of 38mm, using galvanized steel and pintro/Zintro sheet as raw material, with a thickness of 0.38mm to 0.8mm (gauge 22 to 28). The speed for this line is 12-15m/min depending on the length. It takes 28 steps for this profile.
RN-100/35 corrugated sheet is usually used on the roofs of industrial buildings, where structural strength is required, with a measurement of 1000mm of effective width and 35mm of cant, this profile includes an anti-siphon channel in longitudinal overlap, it has an exposed fixing system with FM approval. Zintro, ZintroAlum and Pintro are usually used for the production of this sheet, with a thickness of 0.38mm to 0.8mm (gauge 22 to 28), the machine can reach a working speed of 10 to 15m/min. It takes 24 steps for this profile.
Corrugated sheet 0-100 is a profile used in housing or constructions with low structural and drainage needs, the profile has an effective width of 1032.2mm and a cant of 19mm, using galvanized steel, galvalume and painted polyester (Zintro, Zintroalum and Pintro) as raw material, with a thickness of 0.24mm to 0.9mm (gauge 22 to 32), For this profile, a bending machine or a forming machine must be used which will have a speed of 10m/min to 15m/min, only 18 steps are needed for this profile.
Sheet T0-725 is one of the construction products that due to its structure is very easy to stowage due to its undulating profile, widely used in the construction of warehouses, homes, farm facades, semicircular roofs, silos, curved roofs, among many others, the profile has an effective width of 714.6mm and a cant of 19mm, using galvanized steel, galvalume and painted polyester (Zintro, Zintroalum and Pintro) as raw material, with a thickness of 0.24mm to 0.9mm (gauge 22 to 32), it has a speed of 10m/min to 15m/min, only 18 steps are needed for this profile.
O-30 sheet, is a type of sheet with a corrugated profile of wide application for the construction of roofs, facades, walls, ceilings and even fences. This type of product is one of the most widely used for rural construction due to its ease of handling and transportation. The dimensions of this profile are of an effective width of 752mm and a cant of 19mm. It is made with extra rigid steel on some occasions, but we can use materials such as galvanized, galvalume and painted polyester steel (Zintro, Zintroalum and Pintro), with a thickness of 0.24mm to 0.9mm (gauge 22 to 32), it has a speed of 10m/min to 15m/min, only 18 steps are needed for this profile.
Sheet R-72 and R101, sheet R-72 has an effective width of 720mm and sheet R101 has an effective width of 1018mm, Both profiles stand out for their high load capacity and are used for the construction of industrial enclosures or houses in rural areas. R72 sheet, which features an anti-siphon channel and excellent drainage capacity, is mainly used in the manufacture of roofs and walls, while 101 is ideal for exposed fixing roofs. However, both materials can be used in either of these cases. The two profiles can be produced on the same line, it is enough to change the guides at the beginning of the forming machine, both profiles can carry the anti-siphon channel if necessary. A machine can be produced for each profile if required, the machine has a speed of 10 to 15m/min with panel and chain structure, but we have manufactured machine with a speed of up to 45m/min. It uses Galvanized steel, Galvalume and Painted Polyester (Zintro, Zintroalum and Pintro) as raw material and a thickness of 0.24mm to 0.9mm (gauge 22 to 32).
R90 Sheet, is ideal for covering long clearings or installed on roofs with low slopes and great need for drainage. It generates savings in support elements or polymers and its installation is very fast. It has an effective width of 900mm and a cant of 119.7mm. We can use Galvanized steel, Galvalume and Painted Polyester (Zintro, Zintroalum and Pintro) as raw material and a thickness of 0.45mm to 0.75mm (22 to 26 gauge). It only takes 18 steps and can reach a speed of 10m/min to 15m/min.
All are examples of products that we have manufactured, the speeds will vary depending on the design and budget, the structure in these machines is of the Panel type and chain type transmission system, if you are looking to increase your productivity we can offer a different configuration where the speed of the machine will increase, using wrought iron structure, Moving gearboxes and blade, doubling the speed of the machine. It is recommended to purchase a hydraulic unwinder facilitating the operation for your work team as well as a constant and stable speed.
Our operating systems are translated into Spanish and English, as are the operating manuals, so that your work team can operate the machine efficiently and safely.
Description:
This barrel corrugated roll forming machine was exported to Indonesia. It’s suitable for steel panel with thickness 0.14-0.30mm very thin sheets. It’s small, easily-operated, economical and affordable.
Decoiler--Roll former--Roller 2--Hydraulci cut --Wastage collector--Out Table
|
Corrugated Roof Panel Roll Forming Machine |
||
|
Machinable Material : |
A) Galvanized Coil |
Thickness(MM):0.3-0.8 |
|
B) PPGI |
||
|
C) Aluminum Coil |
||
|
Yield strength : |
200 - 350 Mpa |
|
|
Tensil stress : |
200 Mpa-350 Mpa |
|
|
Nominal forming speed(M/MIN) |
0-20 |
* Or according to your requirement (Optional) |
|
Forming station : |
18 stands |
* According to your profile drawings (Optional) |
|
Decoiler : |
Manual decoiler |
* Hydraulic decoiler (Optional) |
|
Punching system |
No |
* Hydraulic punching (Optional) |
|
Main machine motor brand : |
Sino-Germany Brand |
* Siemens (Optional) |
|
Driving system : |
Chain drive |
* Gearbox drive (Optional) |
|
Machine structure: |
Wall panel station |
* Forged Iron station or torri stand structure (Optional) |
|
Rollers’ material : |
Steel #45 |
* GCr 15 (Optional) |
|
Cutting system : |
Post-cutting |
* Pre-cutting (optional) |
|
Frequency changer brand : |
Yaskawa |
* Siemens (optional) |
|
PLC brand : |
Panasonic |
* Siemens (optional) |
|
Power supply : |
380V 50Hz |
* Or according to your requirment |
|
Machine color : |
Industrial blue |
* Or according to your requirment |
1. Q: Why buy a Linbay machine?
A: At Linbay we seek to establish long-lasting relationships by offering the best quality and price, as well as unparalleled experience and attention in the market. We have customer service in Mexico and China to solve any questions or inconveniences, backed by our 12 years of experience in the market.
2. Q: What is the delivery time?
A: The lead time is 60 to 80 days, during which we produce, assemble and test to ensure that the machine meets your expectations and required safety standards.
3. Q: How do I get started with my machine?
A: Upon receipt of your machine, an assembly tutorial and operation manual will be provided. We recommend a visit from our technician if this is your first time using a forming machine or if you have doubts about its operation. The technician will explain every detail and train your work team.
4. Q: What process do I need to follow to buy a machine?
A: You can start by contacting our sales team via message or email. Afterwards, we will discuss which type of machine best fits your needs and standards. If you want to know more about our company, you can visit our office in Mexico or our factory in China for a tour and observe our manufacturing process. Once you decide to join the Linbay family, we will start manufacturing your machine after signing the contracts and making a 30% down payment.
-
Out table
-
Non-powered
-
Auto-stacker
-
-
Cutting
-
Saw cutting
-
fast flyting cutting
-
-
Driving
-
chain driving system
-
gearbox driving system
-
Gearbox with couplings
-
-
Stands
-
Torri Stands
-
Forged Iron Stands
-
Wall Panel
-
ruler
-
-
Punching
-
Hydraulic punching station
-
Fast Roller Punching system
-
Punching press
-
-
Feeding
-
Servo feeder
-
Leveler
-
-
Decoiler
-
Motorized&Hydraulic decoiler
-
Double head motorized decoiler
-
Manual Decoiler
-
Related Products
